Read the docs
TI-2024-37474 Aliases CVE-2024-56589GHSA-fp39-5r95-hvcc

scsi: hisi_sas: Add cond_resched() for no forced preemption model

Priority LOW 24Published · Updated

Key facts

Attack vector
Local
Privileges required
Low
User interaction
None
Attack complexity
Low
Impact type
—
Confidentiality · integrity · availability
None · None · High
Fix status
Partial Red Hat: 2 without a fix

Attack profile from CVSS 3.1 · NVD. Fix status from CNA and Red Hat.

Summary

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add cond_resched() for no forced preemption model For no forced preemption model kernel, in the scenario where the expander is connected to 12 high performance SAS SSDs, the following call trace may occur: [ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211] [ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 214.575224][ C240] pc : fput_many+0x8c/0xdc [ 214.579480][ C240] lr : fput+0x1c/0xf0 [ 214.583302][ C240] sp : ffff80002de2b900 [ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000 [ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000 [ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000 [ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001 [ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000 [ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000 [ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0 [ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff [ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c [ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0 [ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001 [ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080 [ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554 [ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020 [ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8 [ 214.677191][ C240] Call trace: [ 214.680320][ C240] fput_many+0x8c/0xdc [ 214.684230][ C240] fput+0x1c/0xf0 [ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc [ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140 [ 214.696917][ C240] bio_endio+0x160/0x1bc [ 214.701001][ C240] blk_update_request+0x1c8/0x3bc [ 214.705867][ C240] scsi_end_request+0x3c/0x1f0 [ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0 [ 214.715249][ C240] scsi_finish_command+0x104/0x140 [ 214.720200][ C240] scsi_softirq_done+0x90/0x180 [ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70 [ 214.730016][ C240] scsi_mq_done+0x48/0xac [ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas] [ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw] [ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw] [ 214.752179][ C240] irq_thread_fn+0x34/0xa4 [ 214.756435][ C240] irq_thread+0xc4/0x130 [ 214.760520][ C240] kthread+0x108/0x13c [ 214.764430][ C240] ret_from_fork+0x10/0x18 This is because in the hisi_sas driver, both the hardware interrupt handler and the interrupt thread are executed on the same CPU. In the performance test scenario, function irq_wait_for_interrupt() will always return 0 if lots of interrupts occurs and the CPU will be continuously consumed. As a result, the CPU cannot run the watchdog thread. When the watchdog time exceeds the specified time, call trace occurs. To fix it, add cond_resched() to execute the watchdog thread.

Why it matters now

EPSS 0.00236 14th percentileScored 2026-11-07
Fix Partial Linux (Linux): 5.10.231, 5.15.174, 6.1.120 +3Red Hat: 2 without a fix

SSVC decision points

Not available: CISA has not published SSVC decision points for this record.

Affected products

VendorProductAffected versionsFixed inStatusSource
LinuxLinux4.5 and later5.10.231, 5.15.174, 6.1.120, 6.6.66, 6.12.5, 6.13Patch availableCNA
  • Linux VendorLinux Affected 4.5 and later Fixed in 5.10.231, 5.15.174, 6.1.120, 6.6.66, 6.12.5, 6.13 Patch available CNA

CPE configurations NVD · 1

CPEVersionsRoleVendor
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*4.5 to before 5.10.231; 5.11 to before 5.15.174; 5.16 to before 6.1.120; 6.2 to before 6.6.66; 6.7 to before 6.12.5VulnerableLinux
  • cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* Versions 4.5 to before 5.10.231; 5.11 to before 5.15.174; 5.16 to before 6.1.120; 6.2 to before 6.6.66; 6.7 to before 6.12.5 Vulnerable ·Linux

Remediation

  • Fix · CNA Linux (Linux) Fixed in 5.10.231, 5.15.174, 6.1.120, 6.6.66, 6.12.5, 6.13

Vendor assessments

Red Hat

Red Hat rating: Moderate. Red Hat's page for this CVE →

ProductStatusPlan or fix
Red Hat Enterprise Linux 8AffectedNo fix planned: Out of support scope
Red Hat Enterprise Linux 9AffectedNo fix planned: Will not fix
Not affected: 2 products
  • Red Hat Enterprise Linux 6
  • Red Hat Enterprise Linux 7

Timeline

  1. 2026-10-02 Threatist record created from CVE-2024-56589
  2. 2026-10-03 Alias added: GHSA-fp39-5r95-hvcc

References

Patch 6

  • TI-2025-26358 tls: fix handling of zero-length records on the rx_list KEVCVSS 3.1CRITICAL 9.8
  • TI-2026-38352 netfilter: bridge: make ebt_snat ARP rewrite writable KEVCVSS 3.1HIGH 8.8
  • TI-2013-05264 The (1) get_user and (2) put_user API functions in the Linux kernel before 3.5.5 on the… KEVCVSS 3.1HIGH 8.8
  • TI-2022-00125 Integer overflow in kernel KEVCVSS 3.1HIGH 8.4
  • TI-2013-01864 The perf_swevent_init function in kernel/events/core.c in the Linux kernel before 3.8.9… KEVCVSS 3.1HIGH 8.4
  • TI-2021-05514 Heap Out-Of-Bounds Write in Netfilter IP6T_SO_SET_REPLACE KEVCVSS 3.1HIGH 8.3
See all 15278 →

Sources

This product uses the NVD API but is not endorsed or certified by the NVD. Sources and licences