Read the docs

NULL function pointer call in Zephyr UART wide-data syscalls

Priority LOW 24CWE-476Published · Updated

Key facts

Attack vector
Local
Privileges required
Low
User interaction
None
Attack complexity
Low
Impact type
Denial of service
Confidentiality · integrity · availability
None · None · High
Fix status
Fixed

Attack profile from CVSS 3.1 · CNA. Fix status from CNA. Impact type from CWE-476.

Summary

Zephyr from 3.0.0 before 4.3.2 and from 4.4.0 before 4.5.0 checks the wrong driver operation in its user-mode syscall verifiers for the 16-bit UART API (CWE-476). This lets a user-mode thread with access to a UART device object call a NULL function pointer in kernel mode, in builds with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA. The resulting exception halts or reboots the system, denying service to the device.

Written with Claude Haiku 5.5 from the sources below · 2026-11-10

Description from the CNA

The user-mode syscall verifiers for the 16-bit ("wide data") UART API in drivers/serial/uart_handlers.c validated the wrong driver operation. z_vrfy_uart_poll_out_u16(), z_vrfy_uart_tx_u16() and z_vrfy_uart_rx_enable_u16() each ran K_SYSCALL_DRIVER_UART() against the 8-bit op (poll_out, tx, rx_enable) rather than the 16-bit op that the corresponding implementation dereferences (poll_out_u16, tx_u16, rx_enable_u16). z_impl_uart_poll_out_u16(), z_impl_uart_tx_u16() and z_impl_uart_rx_enable_u16() in include/zephyr/drivers/uart/uart_internal.h call their op unconditionally, with no NULL guard of their own, because the verifier is supposed to have established that the op exists. CONFIG_UART_WIDE_DATA is an application-selectable option that no driver selects, and only a handful of the serial drivers in the tree implement any _u16 operation; every other driver leaves those struct uart_driver_api members NULL while still providing the 8-bit ops the old check inspected. In a build with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA (plus CONFIG_UART_ASYNC_API for the uart_tx_u16() and uart_rx_enable_u16() variants), an unprivileged user-mode thread that legitimately holds access to such a UART device object can invoke the _u16 syscall: the object, permission and op checks all pass, and the kernel-side implementation then performs an indirect call through a NULL function pointer while running at supervisor privilege. The result is a CPU exception taken in kernel context instead of the intended K_OOPS or -ENOSYS return. With the default k_sys_fatal_error_handler() this halts the system (or warm-reboots it under CONFIG_RESET_ON_FATAL_ERROR), so a thread confined by the userspace sandbox can deny service to the whole device — a capability the user-mode privilege boundary is specifically meant to withhold. The call target is a fixed NULL, so there is no attacker-controlled code execution and no memory disclosure; the separate K_SYSCALL_MEMORY_ARRAY_READ()/K_SYSCALL_MEMORY_ARRAY_WRITE() bounds checks on the caller's buffer were and remain correct. The fix points each verifier at the matching _u16 op, using a plain K_SYSCALL_OBJ() object check where the op does not exist or where the implementation already tests it for NULL.

Why it matters now

Exploitation None reported CISA SSVC · not in CISA KEV
EPSS 0.00144 3rd percentileScored 2026-11-16
Fix Fixed zephyr (zephyrproject): 4.3.2, 4.5.0

SSVC decision points

CISA ADP · SSVC 2.0.3

Exploitation
None
Automatable
No
Technical impact
Partial

The decision (Track, Attend, Act) also depends on your mission and well-being impact; see CISA's SSVC guide.

Affected products

VendorProductAffected versionsFixed inStatusSource
zephyrprojectzephyr3.0.0 to before 4.3.2; 4.4.0 to before 4.5.04.3.2, 4.5.0Patch availableCNA
  • zephyr Vendorzephyrproject Affected 3.0.0 to before 4.3.2; 4.4.0 to before 4.5.0 Fixed in 4.3.2, 4.5.0 Patch available CNA

CPE names Threatist (inferred) · 1

Inferred from how NVD named this product before; not given by a source.

CPEVersionsRoleVendor
cpe:2.3:o:zephyrproject:zephyr:*:*:*:*:*:*:*:*——zephyrproject
  • cpe:2.3:o:zephyrproject:zephyr:*:*:*:*:*:*:*:* Versions — — ·zephyrproject

Remediation

Upgrade Zephyr to 4.3.2 for affected releases from 3.0.0 before 4.3.2, or to 4.5.0 for affected releases from 4.4.0 before 4.5.0.

Written with Claude Haiku 5.5 from the sources below · 2026-11-10

  • Fix · CNA zephyr (zephyrproject) Fixed in 4.3.2, 4.5.0

Fixed in the same release

Records fixed by the same vendor advisory or release, as the CNA lists them.

  • Release ·

    zephyrproject zephyr 4.3.2, 4.5.0

    5 records Highest priority Priority MEDIUM 1 MEDIUM, 4 LOW

    Other records, highest priority first

    • TI-2026-89513 Out-of-bounds write in Zephyr HTTP/2 static file handlerPriority MEDIUM 47
    • TI-2026-89516 Simulated EEPROM driver signed offset bypass allows out-of-bounds kernel accessPriority LOW 35
    • TI-2026-89514 Unvalidated PTP interval in Zephyr lets a peer stall time syncPriority LOW 29

Timeline

  1. 2026-11-10 Threatist record created from CVE-2026-90834
  2. 2026-11-12 Priority changed: MEDIUM → LOW
  3. 2026-11-13 CISA SSVC decision points changed

References

  • TI-2026-04422 Out-of-bounds read/write in HTTP WebSocket upgrade via non-null-terminated Sec-WebSocket-Key CVSS 3.1CRITICAL 9.8
  • TI-2026-01361 dns: memory‑safety issue in the DNS name parser CVSS 3.1CRITICAL 9.8
  • TI-2026-09174 Unterminated URI buffer causes out-of-bounds read in LwM2M firmware pull (Package URI) CVSS 3.1CRITICAL 9.1
  • TI-2026-09168 Stack buffer overflow in `net_ipaddr_parse()` IPv4 address-with-port parsing in `subsys/net/ip/utils.c` CVSS 3.1CRITICAL 9.8
  • TI-2024-09625 net: lib: http_server: Buffer Under-read CVSS 3.1HIGH 8.6
  • TI-2021-02863 Usb bluetooth device ACL read cb buffer overflow CVSS 3.1CRITICAL 9.6
See all 366 →

Sources

This product uses the NVD API but is not endorsed or certified by the NVD. Sources and licences